UE Elite General Purpose Adhesive Cleaner
Where to use (Application)
Tape and sticker remains, adhesive
Directions for use
On painted surfaces, the paint must be cured and the surface cooled. on laquer paints test on an unobtrusive area.
1: Turn spray tip so opening points to dot on can rim.
2: Spray liberally on surfaces to be cleaner. On vertical surfaces, do not apply to the point that the product starts to run off.
3: Allow a few minutes for the solvents to penetrate the adhesive or other contaminates.
4: While the surface is wet, wipe with a clean, dry cloth.
5: On areas where the adhesive is thoroughly dry, keep the adhesive wet for several minutes by repeated applications of cleaner. Wipe off with a clean, dry cloth. Repeat applications if necessary.
What does it do ?
Quickly cleans off old adhesive. Will not dissolve with automotive paint that has been properly aged. Also suitable for use on glass & vinyl surfaces.
Do not expose to heat, protect from direct sunlight & do not expose to temperature exceeding 500c. For skin contact wash with mild soap & water. If swallowed do not induce vomiting seek medical attention immediately.
Quickly removes waxes, greases,oil and tar
Remove ight paint overspray, adhesive residue,wax, grease, tree sap,dirt,road tar, oil and bugs in aerosol form.